Conveyor technology

Apron conveyor

For stamped parts, forgings and castings

Apron conveyors from KÖBO ECO>PROCESS reliably transport components, stamped parts, sheet metal scrap, and cold or warm forgings and castings between production, machining and transfer stations.

The interconnected metal links form a robust conveying surface. The belt design is adapted to the material being conveyed, including its temperature, weight and surface characteristics.

Apron conveyor

STAMPING & FORMING

◆

AUTOMOTIVE

◆

MECHANICAL ENGINEERING

◆

FOUNDRIES

◆

METALWORKING

Overview

Apron conveyors for industrial material handling

Apron conveyors continuously transport components, workpieces and production scrap along horizontal or inclined routes. The belt consists of interconnected metal links or plates driven by chains on either side.

A solid, robust conveying surface is particularly suitable for sharp, oily or warm materials that place high demands on conventional belt conveyors. Depending on the application, the belt can use smooth, textured or troughed plates, or an open mesh design.

Apron conveyors can operate as standalone units or as part of an integrated conveyor system. Typical tasks include feeding components into and out of machining equipment, removing stamped parts from presses and transferring forgings and castings to the next station.

Depending on the industry and design, this type of conveyor is also known as a hinged belt conveyor. This page focuses on the apron belt as a robust conveying surface for components and other individual items.

Send an enquiry

DESIGN AND FUNCTION

Apron conveyor design and operation

Design

➔

Standardised conveyor cross sections with a choice of usable belt widths

➔

Material transfer via chutes or designated discharge points

➔

Special conveyor chains with track rollers or flanged rollers

➔

Shaft-mounted geared motor

➔

Steel belt plates available in different designs

➔

Floor or ceiling mounting

➔

Horizontal or inclined conveyor routes

How it works

The material rests on a continuous belt made up of interconnected metal links or plates. Cross rods join the plates so they can articulate, and two conveyor chains run along the sides.

Sprockets drive the chains and move the belt along the conveyor route. The upper run carries the material to the designated transfer or discharge point.

Depending on the material and process, a variable frequency drive can adjust the conveyor speed to match the flow of material to the equipment or production steps before and after the conveyor.

GOODS TO BE TRANSPORTED

What can an apron conveyor transport?

✓

Stamped parts, punching slugs and sheet metal cutouts

✓

Production scrap from stamping, pressing and forming

✓

Fine sheet metal scrap and stamping waste

✓

Metal chips with or without coolant

✓

Cold and warm forgings

✓

Plastic parts and production scrap

✓

Die castings and other cast parts

✓

Components and residual materials from composite machining

✓

Components and workpieces between machining stations

✓

Other individual items and bulk materials, subject to technical review

✓

Metal parts with sharp edges or oily surfaces

APPLICATIONS

Applications for apron conveyors

✓

Stamping and forming: Remove stamped parts, punching slugs, sheet metal cutouts and offcuts from presses and production lines and convey them to the next station.

✓

Forging: Transport cold or warm forgings between presses, cooling sections, inspection stations and further processing steps.

✓

Foundries and die casting: Remove cast and die cast parts and transfer them to cooling, inspection or finishing processes.

✓

Automotive manufacturing: Convey components, stamped parts and production scrap within integrated manufacturing and forming processes.

✓

Mechanical engineering: Feed workpieces into and out of machining equipment and connect successive production steps.

✓

Metalworking: Transport sheet metal parts, metal components, production scrap and, depending on the belt design, metal chips.

✓

Recycling: Transfer sheet metal offcuts and metal production scrap to collection or processing systems.

✓

High temperature applications: Transport warm forgings or die castings using a belt designed for the operating temperature.

VERSIONS

Plate and belt options for apron conveyors

Tear plate

Tread plate

The textured surface is particularly suitable for sheet metal offcuts, punching slugs and stamping waste. When the material is coated with oil, the surface texture can help reduce the adhesion of smaller parts to the belt plates.

Depending on the application, dimpled or embossed sheet metal can be used instead.

Trough-shaped plate

Troughed plate

The troughed profile increases plate stiffness. The clearance between the plate and the tubular sleeve can be matched to the material being conveyed.

This design is particularly suitable for small stamped parts and production scrap that require controlled clearances and a stable conveying surface.

Plate made of smooth sheet metal

Smooth plate

The smooth plate provides a largely flat conveying surface for components, workpieces and individual items. Typical applications include conveying forgings, castings and other metal parts.

Plate dimensions and thickness are selected according to the weight, temperature and characteristics of the material.

Wire webbing

Wire mesh belt

A wire mesh belt is an alternative for applications that require an open conveying surface and good heat dissipation. These include the transport of hot forgings and die castings.

Suitability depends on the temperature, weight and process conditions.

Specifications

Apron conveyor specifications

Typical materials

Stamped parts, punching slugs, sheet metal offcuts, components, workpieces, forgings, castings, fine sheet metal scrap, metal chips and other individual items or bulk materials

Width and usable belt width

100 to 1,100 mm. Greater widths on request.

Length

Up to 100 m per conveyor

Incline angle

30°, 45° or 60°. Other angles subject to technical review.

Belt Plate Thickness

1.5 to 5 mm. Thicker plates are possible depending on the material and load.

Plate and Belt Options

Tread plate, troughed plate, smooth plate or wire mesh belt

Plate Pitch

38.1, 63, 125 or 160 mm

Drive

Shaft-mounted geared motor

Mounting types

Floor or ceiling mounting

Conveyor speed

Adapted to the material flow and adjacent production processes for each project

Benefits at a glance

Robustness and durability

Durable materials and components designed to resist wear support a long service life and reliable operation, including when handling sharp, oily or warm materials.

Adaptability

Width, length, incline angle, plate pitch and surface finish can be matched to the material, throughput and installation conditions.

High conveying capacity

Apron conveyors continuously move components, stamped parts and other individual items between production and machining stations. Conveying capacity is specified to suit the process.

Easy maintenance

Accessible chains, belt plates and drive components simplify inspection, maintenance and the replacement of wear parts.

Cost efficiency

Automated conveying reduces manual handling and supports continuous, economical production.

Comprehensive service

KÖBO ECO>PROCESS supports you from planning and design through installation and commissioning to maintenance and spare parts supply.

Tailored solutions

We configure apron conveyors to suit the material, required capacity, conveyor route, equipment interfaces and available space.

Need help choosing a conveyor?

We are happy to answer your questions about apron conveyors.

CONTACT

An apron conveyor suited to your application

We assess the material, weight, temperature, throughput, conveyor route and installation conditions. We then design an apron conveyor for your application, either as a standalone unit or as part of an integrated conveyor system.

Enquire about an apron conveyor

Related Products

Related conveyor products

Hinged belt conveyor

Hinged belt conveyor

Learn more →

Apron feeder

Slat band conveyor

Learn more →

Screw conveyor

Screw conveyor

Learn more →

Scrap conveyor

Scrap conveyor

Learn more →

Push-rod conveyor

Push rod conveyor

Learn more →

Vibrating feeders

Vibrating feeders

Learn more →

Vacuum chip extraction system

Vacuum chip extraction system

Learn more →

Container loading

Container loading

Learn more →

Chain Conveyor

Chain conveyor

Learn more →

FAQ

FAQ: Frequently asked questions

How does an apron conveyor work?
Apron conveyors transport materials via robust hinged plates. The hinged plates consist of individual metal plates that are flexibly assembled using chain rods and connected via two external chain strands. A powerful drive, which transmits the power via the chain wheels, ensures smooth movement. If required, the conveyor speed can be infinitely adjusted using a frequency inverter. This ensures reliable material handling.

Apron conveyors from KÖBO ECO>PROCESS impress with their adaptability and versatility, which is maximized by selecting the right type of panel. Each plate is specially tailored to different applications and requirements to ensure optimum results.

1. Tear plate

Advantages: The rough surface of the tear plate prevents the adhesion of small residues, such as slugs, and therefore reduces contamination during transportation. It is ideal for processes where the bonding of materials is a challenge.

Areas of application: Transport of sheet metal parts, punching waste or sheet metal scrap. Particularly suitable for environments with high demands on cleanliness and material separation.

2. Trough plate
Advantages: The trough-shaped design ensures increased stability compared to conventional hinge plates. The option of individually adjusting the gap size enables optimum configuration for different transport requirements.

Areas of application: Preferably used for transporting punching waste or materials that require high static stability. Particularly suitable for processes with strict gap dimension requirements.

3. Plate made of smooth sheet metal
Advantages: The smooth surface of the hinged plate made of smooth sheet metal enables flexible handling and ensures efficient material conveying without high demands on the gap dimension.

Areas of application: Ideal for transporting chips, forged parts or other piece goods that require easy handling and smooth conveying surfaces.

4. Wire belt
Advantages: The wire belt conveyor is the perfect solution for high-temperature applications. It enables the transportation of hot forged and die-cast parts and offers good heat dissipation thanks to its open structure.

Areas of application: Ideal for use in sorting systems and production lines where hot materials need to be conveyed continuously. Suitable as a single or system conveyor.